Metallized Capacitors - Welded Metal Cans Designed for Millisecond Discharge Industrial and R&D Applications Standard Ratings up to 26 kV and 200 kJ
Part Number	Cap (µF)	Rated Voltage (kV)	Energy (kJ)	Peak Curren (kA)	RMS Current (A)	Approx. ESL (nH)	Design Life (20% VR)	Energy Density (J/cc)
3565CMF3408	4080	5.65	65	94	190	300	1 x 104	1.0
3565CMF3816	8160	5.65	130	188	250	150	1 x 104	1.0
3650CMF3480	4800	6.5	101	114	230	300	1 x 103	1.8
3650CMF3750	7500	6.5	158	178	245	150	1 x 103	1.8
3650CMF3950	9500	6.5	201	225	275	200	1 x 103	1.8
4113CMF3102	1020	11.3	65	47	95	400	1 x 104	1.0
4113CMF3204	2040	11.3	130	94	125	200	1 x 104	1.0
4130CMF3120	1200	13	101	57	115	400	1 x 103	1.8
4130CMF3187	1875	13	158	89	123	200	1 x 103	1.8
4130CMF3237	2375	13	201	113	138	300	1 x 103	1.8
4170CMF4453	453	16.95	65	31	63	600	1 x 104	1.0
4195CMF4533	533	19.5	101	38	77	600	1 x 103	1.8
4226CMF4255	255	22.6	65	24	48	800	1 x 104	1.0
4226CMF4510	510	22.6	130	47	63	400	1 x 104	1.0
4260CMF4300	300	26	101	29	58	800	1 x 103	1.8
4260CMF4469	469	26	158	45	61	400	1 x 103	1.8
4260CMF4594	594	26	201	56	69	400	1 x 103	1.8

The table shows standard ratings for illustrative purposes only. Custom ratings and sizes are easily engineered based on customer requirements and application information. Thousands of such custom designs are represented in our files. Please complete an Application Questionnaire and/or contact our Sales Department.

• Capacitance tolerance ± 10% standard, ± 5% is available upon request
• End-of-life is defined by 5% capacitance loss. For longer life, derate the voltage per Chart 1
• Nominal voltage reversal rating is 20%. Derate for higher voltage reversal per Chart 2
• Fault condition voltage reversal rating is 80%. Maximum Fault Current is twice the rated current, up to a maximum of 350 kA. Contact us for higher pulse current requirements
• Two low profile, high voltage bushings isolated from the case is the standard circuit configuration for Series CMF. Single terminal and multiple terminal designs are available upon request
• Capacitors are provided with internal "bleeder resistors" to provide a means to discharge the capacitor should it become disconnected from external circuitry. The time constant for self-discharge is 5,000-10,000 seconds
• RMS current ratings are based on a 10 ºC internal hot spot temperature rise after continuous operation with convective air cooling. If the capacitor ambient temperature is well below maximum or forced air cooling is available, or if the capacitor is operated in burst mode duty cycle, higher RMS currents may be possible. Contact the factory with your application information
• Operating temperature range is -20 to +65 ºC. Storage temperature range is -40 to +70 ºC
• Standard models are impregnated with vegetable oil "RSO". A Material Safety Data Sheet (MSDS) is available upon request.
   
  Specifications are subject to change without prior notice.

Home | Energy Products | News | Electronic Systems | General Atomics | Quality | Capacitors | Capacitor Selection Guide
Power Supplies | Pulse Power Systems | Pulse Forming Networks | Fuses | Resistors | Product Questionnaires
Product Applications | Catalogs| Links | Technical Publications | Frequently Asked Questions | RMS Current Calculator
Contact Us | End User Statement | Informational Emails | International Reps | Site Map